The whole process of the automatic ultrasonic cleaning machine is mechanically automatic. (Using a single-beam multi-arm manipulator). The automatic ultrasonic cleaning machine is mainly composed of an ultrasonic cleaning tank and an ultrasonic generator. The ultrasonic cleaning tank is made of high-quality stainless steel with good elasticity and corrosion resistance. The bottom is equipped with an ultrasonic transducer vibrator; the ultrasonic generator generates high frequency and high voltage, which is transmitted to the transducer through the cable connection line. The transducer and the vibration plate are together Generate high-frequency resonance, so that the solvent in the cleaning tank is cleaned of dirt by ultrasonic action.
Studies have shown that when ultrasonic waves act in a liquid, the bursting of each bubble in the liquid will produce a shock wave with extremely high energy, which is equivalent to an instantaneous high temperature of several hundred degrees and a pressure of up to thousands of atmospheres. This phenomenon is called "empty "Chemical effect", ultrasonic cleaning uses the shock wave generated by the burst of bubbles in the liquid to clean and wash the inner and outer surfaces of the workpiece.　Ultrasonic waves propagate in the liquid, causing the liquid and the cleaning tank to vibrate together at the ultrasonic frequency. When the liquid and the cleaning tank vibrate, they have their own natural frequency. This vibration frequency is the sound wave frequency, so people hear the buzzing sound.